Whats this buzzing? *vid inside*
#11
08-10-2011, 01:13 PM
It could very well be a bad reed valve or your "pair reed valve" going bad, although it's not very common. Have you done the clean air mod?
Reed valves are one way valves that allow passing exhaust gasses to pull suction of fresh air from the air box into the exhaust headers(for cleaner emissions). there are 2 of them on the f4i, each one has 2 ports connecting to an exhaust exit. one per cylinder.
The pair reed valve is a plastic valve/switch that connects the two reed valves together. the clean air mod removes the PRV and connect the reed valves to the PCV vent on the valve cover (rubber hose below).
Shown here on the top of the valve cover
Reed valves are one way valves that allow passing exhaust gasses to pull suction of fresh air from the air box into the exhaust headers(for cleaner emissions). there are 2 of them on the f4i, each one has 2 ports connecting to an exhaust exit. one per cylinder.
The pair reed valve is a plastic valve/switch that connects the two reed valves together. the clean air mod removes the PRV and connect the reed valves to the PCV vent on the valve cover (rubber hose below).
Shown here on the top of the valve cover
Last edited by Sick97SS; 08-10-2011 at 01:34 PM.
#12
08-10-2011, 01:22 PM
Join Date: Apr 2008
Location: Lansing, Mi
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
It could very well be a bad reed valve or your "pair reed valve" going bad, although it's not very common. Have you done the clean air mod?
Reed valves are one way valves that allow passing exhaust gasses to pull suction of fresh air from the air box into the exhaust headers(for cleaner emissions). there are 2 of them on the f4i, each one has 2 ports connecting to an exhaust exit. one per cylinder.
The pair reed valve is a plastic valve/switch that connects the two reed valves together. the clean air mod removes the PRV.
Shown here on the top of the valve cover
Reed valves are one way valves that allow passing exhaust gasses to pull suction of fresh air from the air box into the exhaust headers(for cleaner emissions). there are 2 of them on the f4i, each one has 2 ports connecting to an exhaust exit. one per cylinder.
The pair reed valve is a plastic valve/switch that connects the two reed valves together. the clean air mod removes the PRV.
Shown here on the top of the valve cover
Thread
Thread Starter
Forum
Replies
Last Post
