just go up to about 8000 9000 rpm and just close and shut the throttle it will come off the ground and dont pull on the handle bars i use to be 210 and i could do it

 

i went riding the other day and i just hit the throttle hard in first and it came right up no problem... then i was like i gotta try that again and did it a few more times bringing the front up about 2 1/2 3 feet... and this is my first bike and first season riding and i love it !!!!! cant wait for the summer!!!! also did my first smoke show and no clutch burning here...F***ing awsome..

 

IF it's your first season, take it easy and work up slowly. I know it's hard to do but you'll be happier and safer in the long run.

Wheelies get old and will get your in trouble, and burnouts waste your tire.

 

Wheelies get old!?!? Believe me, no disrespect. But I think riding on two wheels is whats gets old. Wheelies keep things fresh!

As for the rubbers...I melted my dunlops off without worry. But i won't be wasting the "sticky sweet" PP2ct's anytime soon.

 

I guess those stickers, and underglow go with your attitude to riding.

You ride with a good group through some twisties and I promise riding will not be boring.

 

ok i just got my bike today and it is like 5 6 degrees out side and i just got it maybe half throttle and the front end came right up i just got my injectors cleaned and a new ecm and a whole lot faster maybe u should have yours checked

 

OK you guys are right. I went out today and got the front up in 1st. I just did like suggested and let off at 6-7000 rpm then went hard on the throttle while sitting back. The front came up and I let off because I was scared by the feeiling... lol i know Im a wuss. It may be the temp cause it was 45 degrees but she was running fast today. Some days more then othere so I may get a new ecm like the poster above....
What is the ecm????

 

The Engine Control Unit or ECU is a designated computer that was developed to manage the engine control system. The ECM consists of electronics which are mounted on a multi-layer circuit board. The ECM monitors and adjusts the air/fuel mixture
it just manages the air/fuel mixture and if you clean your injectors it make the spray coming out ignite better in the plugs which helps in the thottle

 

I am 250+ pounds and can power wheelie my f4i very easily....

 

I don't like powering up at all really, it kinda scares me because of the speed you must be at to pull it. But ive got stock gearing, and I pulled it up in first on mine. Wasn't crazy wheelie stuntin but I pulled it up. Clutching is so much more fun..