how to bleed the clutch?????
#41
![Default](/forum/images/icons/icon1.gif)
FINALLY!!!!!
well after i changed my clutch i thought my problem was solved. But it wassnt! Yup sure enough my bike started to slip yet again. So i gave my local salvage yard a call(owns and loves these old canes) he thought it sounded like my slave cylender was sticking. So he told me to check a small relief valve in my clutch master. Sure enough it looked clogged, i cleaned it out and used a small wire to clear the blockage. And viola! The fluid shot back out(built up pressure from the slave not fully retracting). Filled her back up and no more slip! So if your clutch starts to slip, and it feels like you just need a hair of pressure on the lever to dis engage the clutch. Then check to see if the small hole in the clutch master is clogged. Thanks everyone!
well after i changed my clutch i thought my problem was solved. But it wassnt! Yup sure enough my bike started to slip yet again. So i gave my local salvage yard a call(owns and loves these old canes) he thought it sounded like my slave cylender was sticking. So he told me to check a small relief valve in my clutch master. Sure enough it looked clogged, i cleaned it out and used a small wire to clear the blockage. And viola! The fluid shot back out(built up pressure from the slave not fully retracting). Filled her back up and no more slip! So if your clutch starts to slip, and it feels like you just need a hair of pressure on the lever to dis engage the clutch. Then check to see if the small hole in the clutch master is clogged. Thanks everyone!
Last edited by outlawfox13; 09-27-2011 at 09:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post