im about to change my front sprocket. im asuming i need to loosen the nuts on either side of the swingarm and scoot the wheel up and then punch out the 2 rivets on my chain.i guess that is the master link? then take the front sprocket off and throw the new one on. do i need to grease it up when i put the new one on? i appreciate any help i can get, thanks

 

Hopefully this will help. Good Luck

https://cbrforum.com/m_17497/tm.htm

 

I am regearing the front of my 929 also. I did not have to remove the whole chain. I just took off the cover, scooted the rear wheel forward and removed,switched and reinstalled the front sprocket, slid the chain back over and it's good to go.