FI Light on after bike is turned off
#41
04-12-2008, 10:10 AM
RE: FI Light on after bike is turned off
This is much easier to do in Daylight.
(Black Connector, tested with the Red Lead connected to the battery, and the Black Lead on the connector)
Black Wire w/Brown Stripe: 12V
Black Wire w/Brown Stripe: 12V
Green Wire (Solid): 12V
(White Connector, tested with the Red Lead connected to the battery, and the Black Lead on the connector)
Green wire w/Blue Stripe: 11.5V
(Black Connector, tested with the Red Lead connected to the battery, and the Black Lead on the connector)
Black Wire w/Brown Stripe: 12V
Black Wire w/Brown Stripe: 12V
Green Wire (Solid): 12V
(White Connector, tested with the Red Lead connected to the battery, and the Black Lead on the connector)
Green wire w/Blue Stripe: 11.5V
#42
04-12-2008, 02:38 PM
Senior Member
Join Date: May 2007
Location: Baltimore, MD, USA
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
RE: FI Light on after bike is turned off
im at work right now. when i get out we'll continue. your blk/brn wires should be 12v with black lead grounded and probing with red lead.
you said you checked your fuses. are there 6 or only 4? pull them all and double check for burned fuses. they should be red 10 amp fuses.
talk again in a few hours.
you said you checked your fuses. are there 6 or only 4? pull them all and double check for burned fuses. they should be red 10 amp fuses.
talk again in a few hours.
Thread
Thread Starter
Forum
Replies
Last Post
dewthedoo05
CBR 1000F "Hurricane"
5
09-04-2007 09:32 PM
