hello all........when i bought my bike (01 cbr 600 f4i) the inspector told me that i need my FI serviced...now im wondering if i could do any of this myself or would this problem be fixed with a FI cleaner that i could buy at a car shop...also i changed the idle manually down to about 1500-1750rpm...so i started riding for about 10-15mins and it went back to about 2000-2500rpm... so any help would be nice

 

my bike idles at cold start around 3000rpm for about 2 minutes, then drops to 1500

 

Not to thread jack, but is it safe to ride on a cold bike when the temp isnt showing on the spedo?

 

u wanna let ur bike warm up before riding, but i dont think the temp shows till like 100 so if u do ride it before it warms up to that definatly dont just jump on and take off at open throttle

 

plus its gonna cut out and run sketchy if its cold...just wait till it comes up on the screen...i usually wait till 120 or so

 

ok soooo you guys are jackin my thread here haha.....FI cleaner? anybody serviced the FI themselves? if so..how??

 

F4i idles around 1300... you are way high. What kind of "inspector" couldn't pick up on that?

 

he was the one that picked it up..........so i need some options on what to do? any help eh?

 

Explain what the "inspector" thought was the problem requiring a FI servicing.

Before doing anything though, I'd start the bike, when it's up to operating temperature adjust the idle to ~1250-1300 rpm. If the bike rides fine from there then you're done.

 

Agree....