Fast Idle Question
#11
Any input guys? I think it has to do with the PC3. My bike pre-PC3 would cold start normal (as in start at 2000+ rpm then creep down to 1500-1400 when warmed)
NOW...it will NEVER do that...it will do one of two things...
1. Start to a weak 1000-1200 and after 7 seconds bump to 1500 and the FI light will come and stay on. This ONLY HAPPENS on COLD START NEVER ON WARMED START
2. Start to a 1400-1500 and stay there regardless of temp..NO FI light?
I've reset the battery...unplugged the MAP sensor harness and cleaned as well as checked the vacuum hose to the unit
I havent checked the wax unit and dont want nor see the need to....It seems computer/PC3 related
NOW...it will NEVER do that...it will do one of two things...
1. Start to a weak 1000-1200 and after 7 seconds bump to 1500 and the FI light will come and stay on. This ONLY HAPPENS on COLD START NEVER ON WARMED START
2. Start to a 1400-1500 and stay there regardless of temp..NO FI light?
I've reset the battery...unplugged the MAP sensor harness and cleaned as well as checked the vacuum hose to the unit
I havent checked the wax unit and dont want nor see the need to....It seems computer/PC3 related
#12
My bike does not auto choke, never has while in my possession.
When i got it it just had a K&N and a slip on, its now got a lot of cosmetic mods but more importantly a power commander.
Next time i have it torn down im going to pull out the wax unit and check it for function, obviously something is wrong with it.
When i got it it just had a K&N and a slip on, its now got a lot of cosmetic mods but more importantly a power commander.
Next time i have it torn down im going to pull out the wax unit and check it for function, obviously something is wrong with it.
#13
I find it hard to believe that the three of us all have a PCIII and all of are wax units went out. I'm pretty sure my fast idle was working fine before I installed my PCIII. If I get some time I'm going to unplug the PCIII and put the O2 sensor back into the mid pipe and see if that fixes my fast idle. I have a new wax unit on hand but I'm going to try that before I tear into it.
Moses
Moses
#14
#15
Thread
Thread Starter
Forum
Replies
Last Post