Ok, I just blew my 93 900rr motor yesterday, to be more specific I spun a berring and possibly scorned the walls due to lack of oil (1 quart down).

Now my question is, what options do I have?

1. Do I rebuild?
2. Do I need to find another motor for sale?
3. Is there another swap I can do without major modifacation? (929, 954, 1000?)

Thanks for all your help!

 

It depends on your time frame because a rebuild will take a few weeks and be the most expensive option. I wouldn't attempt any kind of swap without considerable fabrication skill and the tools to turn down spacers and perform welding. Used motors are always a gamble, but they can be had on Ebay for reasonable prices. Just gotta look at what you can afford and see whats out there. A rebuild by the way will cover all the damage that you did to the motor unless you ran it a while with the bearing spun, then youe bearing caps and support might be too damaged. If you piece out that motor I bet you could cover half the cost of a used one....thats your best bet.

 

929 Engine will NOT fit in the 900rr frame without considerable fabrication. You can bolt ANY 900rr engine in the frame with little to no changes.

Ive seen a few on ebay in the 3-500 range, just keep an eye open.

 

Thanks guys! I am taking it in this weekend if the mechanic has time.

 

i have every part you need to rebuild that bike. call 2054477094

 

I can sell you a 99 engine not sure it will work with your wire harness though

 

try to find an enginr so u can ride right away and in the mean time rebuild the other one.

 

I would just get one to rid eif i was you., and if you are going to build build it big. I mean like 945 or 970 or 997 or 1033

 

saw ur post u still got the engine mine is toast. Its 95 chasis 97 motor with all harness. Pretty sure direct fit. Let me know on the motor or anybody else with a 96-99 sc33
text call me 469-734-0270. Im from Dallas Texas. Area