F3 Engine Rebuild
#71
04-26-2011, 10:07 AM
Member
Join Date: Mar 2011
Location: beaumont tx
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
#72
07-25-2013, 01:05 PM
Member
Join Date: May 2013
Location: Billerica, ma
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
#73
07-25-2013, 01:06 PM
Member
Join Date: May 2013
Location: Billerica, ma
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
#75
02-13-2014, 08:16 PM
#76
08-10-2019, 07:22 PM
I sent the upper case out to get over bored. I forgot to take a picture before I had the cases back together. New bigger pistons installed.
Attachment 51956
Next step was to make lighter and just as strong if not stronger motor mounts and spacers. All the weights are in grams.
Attachment 51957
Just one of the stock engine brackets.
Attachment 51958
Both of the brackets I made weight less than one of the stock ones.
Attachment 51959
The engine uses 5 spacers to set it in the frame. The smallest one wasn't worth making so its not in the picture.
Attachment 51960
All these spacers weight less than the big stock spacer.
Put the engine back in the frame. I have the new over bore head gasket, just to cold to work on it.
Attachment 51961
Attachment 51962
Attachment 51956
Next step was to make lighter and just as strong if not stronger motor mounts and spacers. All the weights are in grams.
Attachment 51957
Just one of the stock engine brackets.
Attachment 51958
Both of the brackets I made weight less than one of the stock ones.
Attachment 51959
The engine uses 5 spacers to set it in the frame. The smallest one wasn't worth making so its not in the picture.
Attachment 51960
All these spacers weight less than the big stock spacer.
Put the engine back in the frame. I have the new over bore head gasket, just to cold to work on it.
Attachment 51961
Attachment 51962
Thread
Thread Starter
Forum
Replies
Last Post
thirdgenlxi
Sights 'N Sounds
58
01-21-2022 03:58 AM
