Some direction pls
Thread Starter
|
Junior Member
Joined: Feb 2012
Posts: 20
Likes: 0
Some direction pls
Can some one post a link to or tell me how to change the final drive chain and sprockets? Standard size will do. And possible to do with a non-solid chain? Thanks all.
Last edited by Sprock; Feb 28, 2012 at 11:57 AM. Reason: new members post await moderation until we get to know you
September 2009 ROTM Winner - Faster than a Speeding ..........
Joined: Nov 2008
Posts: 3,808
Likes: 3
From: UK
Don't think we have a specific chain replacement 'how too'. But there are plenty on youtube.
You'll need an angle grinder and chain riveting tool as well as the normal selection of spanners.
Very easy to do, just make sure you take a note of the position of the gear change lever. There should be a small reference point stamped into the gear selector shaft, but the one on my bike is so faint I missed it the first time I had the lever off.
Also don't over tighten the rivet link.
Download a copy of the workshop manual, take your pick from here :- Workshop Manuals - CBR Forum - Enthusiast forums for Honda CBR Owners
Any problems just give us a shout, we'll talk you through it
You'll need an angle grinder and chain riveting tool as well as the normal selection of spanners.
Very easy to do, just make sure you take a note of the position of the gear change lever. There should be a small reference point stamped into the gear selector shaft, but the one on my bike is so faint I missed it the first time I had the lever off.
Also don't over tighten the rivet link.
Download a copy of the workshop manual, take your pick from here :- Workshop Manuals - CBR Forum - Enthusiast forums for Honda CBR Owners
Any problems just give us a shout, we'll talk you through it
Thread
Thread Starter
Forum
Replies
Last Post