wiring
#13
#14
#15
#17
RE: wiring
i dont remember what wires i cut and connected, but i bypassed the tip over sensor on the main harness under the seat. so now the only wires i have up front is for the low beam. but i have that tucked and ziptied to the cross bar behing the neck of the frame. you cant see a thing. the only wires you see are from the ignition. if you dont want to trim down your entire harness then run the connectors for your tach and lights through the small space between the radiator (the two brackets on top of the radiator) and neck of your frame. it moves the wires from the side of your frame for a cleaner look.
Thread
Thread Starter
Forum
Replies
Last Post