Jorga Newb
#1
Jorga Newb
Hey all. New guy on here from Valdosta, Ga. Been lurking for quite some time now and finally decided to sign up so I can ask a few Q's and hopefully help some people out with who knows what. Anyway, I'm currently re-building a 97 F3. I just got done with the F4 guage swap, F4 rear shock, and am welding on a new subframe to accept an 01 R1 tail and seat. Shocks are totally redone and about 15-18 (roughly) pounds shaved off. Down 1 frnt tooth and a sneaky pete 15-20 2 stage home brewed nitrous setup. Cut out half the wiring harness (un-needed stuff like kickstand switch, etc to clean it up a bit).
I'll upload a pic or 2 when I get home.
I'll upload a pic or 2 when I get home.
#3
#4
RE: Jorga Newb
Thanks. I'll def. post up some pics. Here's my 'mod' list so far...
Full 4-2-1 exhaust, modified (cut and revamped innards) Yoshi pipe, modified stacks, lightened swingarm, 520, f4 rear shock, modified front suspension, sneaky peat, F4 guages, a LOT of electrical work (deleted and revamped), shorty GSXR aftermarket mirrors, -1 fnt sprocket, no undertail/hugger, 1/5 turn throttle, GM'd heads and mild headwork, ram air box modified.
I want to add LED's for turn signals, and I would like to run a different light in the front. One that dosn't weigh in a 400 pounds like the stock one does, and shed about 4 more pounds from the front. Going away with the steel stay and going aluminum instead. In work: R1 tail and seat.
Full 4-2-1 exhaust, modified (cut and revamped innards) Yoshi pipe, modified stacks, lightened swingarm, 520, f4 rear shock, modified front suspension, sneaky peat, F4 guages, a LOT of electrical work (deleted and revamped), shorty GSXR aftermarket mirrors, -1 fnt sprocket, no undertail/hugger, 1/5 turn throttle, GM'd heads and mild headwork, ram air box modified.
I want to add LED's for turn signals, and I would like to run a different light in the front. One that dosn't weigh in a 400 pounds like the stock one does, and shed about 4 more pounds from the front. Going away with the steel stay and going aluminum instead. In work: R1 tail and seat.
Thread
Thread Starter
Forum
Replies
Last Post