Won't go past 110 km/h after a crash
Senior Member
Joined: May 2011
Posts: 1,988
Likes: 439
From: Mesa, AZ
You need to make sure fork-blades are parallel so they don't twist wheel-bearings when installed.
Test with piece of glass that can lay on both fork-blades, like 25x25cm. Make sure glass sits on both fork-blades flat without rocking.
Otherwise you may have twist in upper AND lower yoke that's not holding fork-blades parallel.
Test with piece of glass that can lay on both fork-blades, like 25x25cm. Make sure glass sits on both fork-blades flat without rocking.
Otherwise you may have twist in upper AND lower yoke that's not holding fork-blades parallel.
Senior Member
Joined: Apr 2015
Posts: 708
Likes: 187
From: Connecticut / Florida
Steering Stem - 53219KPP900 https://www.cmsnl.com/honda-cbr125r-...r_53219kpp900/
Top Yoke - 53300KPP860 - https://www.cmsnl.com/honda-cbr125r-...k_53300kpp860/
You're not going to be able to fix these with a torch and a hammer.
Top Yoke - 53300KPP860 - https://www.cmsnl.com/honda-cbr125r-...k_53300kpp860/
You're not going to be able to fix these with a torch and a hammer.
Thread Starter
|
Junior Member
Joined: May 2023
Posts: 11
Likes: 1
You need to make sure fork-blades are parallel so they don't twist wheel-bearings when installed.
Test with piece of glass that can lay on both fork-blades, like 25x25cm. Make sure glass sits on both fork-blades flat without rocking.
Otherwise you may have twist in upper AND lower yoke that's not holding fork-blades parallel.
Test with piece of glass that can lay on both fork-blades, like 25x25cm. Make sure glass sits on both fork-blades flat without rocking.
Otherwise you may have twist in upper AND lower yoke that's not holding fork-blades parallel.
Thread Starter
|
Junior Member
Joined: May 2023
Posts: 11
Likes: 1
Steering Stem - 53219KPP900 https://www.cmsnl.com/honda-cbr125r-...r_53219kpp900/
Top Yoke - 53300KPP860 - https://www.cmsnl.com/honda-cbr125r-...k_53300kpp860/
You're not going to be able to fix these with a torch and a hammer.
Top Yoke - 53300KPP860 - https://www.cmsnl.com/honda-cbr125r-...k_53300kpp860/
You're not going to be able to fix these with a torch and a hammer.
Thread
Thread Starter
Forum
Replies
Last Post