Here is what I recommend...

- 4mm - 14mm 1/4" sockets plus ratchet w/ 3 different extension lengths
- 8mm - 19mm 3/8" sockets plus ratchet w/ 3 different extension lengths
- 17mm - 36mm 1/2" sockets plus ratchet w/ 2 different extension lengths
- 10mm - 19mm 3/8" impact sockets
- 12mm - 24mm 1/2" impact sockets
- 1/2" to 3/8" reducer
- 3/8" to 1/4" reducer
- 3/8" Torque wrench
- 1/2" Torque wrench
- 1/2" Breaker bar
- Spark Plug Sockets

- Metric Combination wrenches 7mm - 34mm (2 sets of 7mm - 22mm is nice to have)
- Cresent Wrenches

- 24 oz Ball Pein Hammer
- 8 oz Ball Pein Hammer
- 12 oz Dead Blow Hammer
- Rubber Hammer

- Metric Allen Key set 2mm - 10mm
- Metric Allen socket set 4mm - 8mm
- Various sizes of Philips screw drivers (Stubby to long)
- Various sizes of Standard screw drivers (Stubby to long)

- Pliers (Snap ring, Brake Snap Ring, Needle nose, dikes, channel locks)
- Diagonal Cutters
- Wire Cutter/Stipper

- Multi Meter
- Calculator
- Brake Bleeding Kit
- Dremel with various cutting disks and polishing tools
- Putty knife
- Soldering Iron
- Flash Lights
- Chain Breaker/Riveter
- Fork Seal Driver (size depends on your bike)
- Cord or Cordless drill
- Drill bit set
- Oil Filter Wrench (one that fits your bike)
- Clutch Holder (looks kind of like vice grips)
- Impact screw driver (Don't go cheap here, bits break on cheap ones)

- Air Compressor
- Fittings for putting air into tires to blow air(I've got a couple)
- 1/2" Impact gun
- 3/8" Impact gun
- Angle Grinder