Need help guys !!
#21
#22
![Default](/forum/images/icons/icon1.gif)
well, just found out its not the battery alone bc i tried to go for a ride since the weather finally improved but she wouldnt start and it was happening just as it had before ... but i know its not from sitting too long or anything like that bc ive been cranking her every other day since i havent been riding ... how do you check the sensor in question to reset it ?
#23
![Default](/forum/images/icons/icon1.gif)
Well, it could still be nothing since you say you're running it every day without riding it. The charging systems on our bikes are a little weak, and don't really charge under about 3-4k rpms, so you'd actually be discharging it by starting it, which would drain the battery, and then letting it run, which would put a drain on the battery.
#24
![Default](/forum/images/icons/icon1.gif)
It won't be the bank angle sensor. The sensor is designed to shut the fuel pump off in case the bike is laid on its side. Since you had the bike running again, it wouldnt be the sensor. Also, the bike will still crank over fine, it just wont fire because there wouldnt be any fuel. The sensor doesn't prevent the engine from cranking over.
Dyracuse is on to something though. If you start the bike, it needs to run for awhile to recharge the battery. the batteries on these bikes are so small, it takes a good portion of the available juice to start the bike, then if the battery is not recharged, you are simply killing the battery little by little each day. Although, I disagree in the 3-4K rpm needed to charge the battery. That is the way bikes were a long time ago, but they have come along way and they produce enough voltage at idle to recharge the battery.
If the bike is going to sit for awhile without being ridden, purchase a battery tender. Just hook it up and it will keep your battery at its optimum level.
How far have you driven it?
Have you used a multi-meter to measure the voltage at the battery?, with it running and not?
Dyracuse is on to something though. If you start the bike, it needs to run for awhile to recharge the battery. the batteries on these bikes are so small, it takes a good portion of the available juice to start the bike, then if the battery is not recharged, you are simply killing the battery little by little each day. Although, I disagree in the 3-4K rpm needed to charge the battery. That is the way bikes were a long time ago, but they have come along way and they produce enough voltage at idle to recharge the battery.
If the bike is going to sit for awhile without being ridden, purchase a battery tender. Just hook it up and it will keep your battery at its optimum level.
How far have you driven it?
Have you used a multi-meter to measure the voltage at the battery?, with it running and not?
#26
![Default](/forum/images/icons/icon1.gif)
Well, it could still be nothing since you say you're running it every day without riding it. The charging systems on our bikes are a little weak, and don't really charge under about 3-4k rpms, so you'd actually be discharging it by starting it, which would drain the battery, and then letting it run, which would put a drain on the battery.
#27
![Default](/forum/images/icons/icon1.gif)
It won't be the bank angle sensor. The sensor is designed to shut the fuel pump off in case the bike is laid on its side. Since you had the bike running again, it wouldnt be the sensor. Also, the bike will still crank over fine, it just wont fire because there wouldnt be any fuel. The sensor doesn't prevent the engine from cranking over.
Dyracuse is on to something though. If you start the bike, it needs to run for awhile to recharge the battery. the batteries on these bikes are so small, it takes a good portion of the available juice to start the bike, then if the battery is not recharged, you are simply killing the battery little by little each day. Although, I disagree in the 3-4K rpm needed to charge the battery. That is the way bikes were a long time ago, but they have come along way and they produce enough voltage at idle to recharge the battery.
If the bike is going to sit for awhile without being ridden, purchase a battery tender. Just hook it up and it will keep your battery at its optimum level.
How far have you driven it?
Have you used a multi-meter to measure the voltage at the battery?, with it running and not?
Dyracuse is on to something though. If you start the bike, it needs to run for awhile to recharge the battery. the batteries on these bikes are so small, it takes a good portion of the available juice to start the bike, then if the battery is not recharged, you are simply killing the battery little by little each day. Although, I disagree in the 3-4K rpm needed to charge the battery. That is the way bikes were a long time ago, but they have come along way and they produce enough voltage at idle to recharge the battery.
If the bike is going to sit for awhile without being ridden, purchase a battery tender. Just hook it up and it will keep your battery at its optimum level.
How far have you driven it?
Have you used a multi-meter to measure the voltage at the battery?, with it running and not?
#28
Thread
Thread Starter
Forum
Replies
Last Post
speeddemonx60
Off Topic
10
02-07-2010 11:02 AM