General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

Hydraulic clutch

Thread Tools
 
Search this Thread
 
Old Mar 27, 2011 | 03:16 PM
  #1  
patches_mcmatt's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 34
Likes: 0
From: Tennessee
Default Hydraulic clutch

Years ago when I was into racing ATVs, I had a hydraulic clutch lever from Magura on my ATV. I know Magura makes hydraulic clutch levers for dirtbikes and ATVs, but can't find any information about levers for sport bikes, specifically a 1993 900RR. Does anyone know where I could find one? It doesn't have to be Magura. Thanks.
 
Reply
Old Mar 28, 2011 | 01:31 AM
  #2  
revilingfool's Avatar
Senior Member
Joined: Jun 2010
Posts: 197
Likes: 0
From: northeast ohio
Default

Pazzo for 93 900rr
 
Reply
Old Mar 28, 2011 | 07:39 AM
  #3  
patches_mcmatt's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 34
Likes: 0
From: Tennessee
Default

Are the Pazzo levers better than a hydraulic lever? I'm not looking for a hydraulic lever because I don't like the cable type, I just really miss the feel of a hydraulic clutch lever.
 
Reply
Old Apr 3, 2011 | 04:12 PM
  #4  
patches_mcmatt's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 34
Likes: 0
From: Tennessee
Default

Nobody knows where I can buy a hydraulic clutch for my bike? Surely there are such things available, right? Anybody?
 
Reply
Old Apr 4, 2011 | 10:11 AM
  #5  
highwaypatrol's Avatar
Senior Member
Joined: Dec 2010
Posts: 390
Likes: 0
From: I live in Plympton Plymouth
Default

Assuming you find a hydraulic clutch lever for your bike, would't it require a different type of mechanism at the clutch end as the cable type normally pulls on the clutch lever whereas the hydraulic action would have to push against the lever? Maybe I'm not thinking straight?
 
Reply
Old Apr 4, 2011 | 10:13 AM
  #6  
kazspeed's Avatar
Banned
Joined: Nov 2010
Posts: 489
Likes: 0
Default

Moose Easy-Pull System [M555-00] - $34.99 : HAI Bike Shop
 
Reply
Old Apr 7, 2011 | 06:31 PM
  #7  
patches_mcmatt's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 34
Likes: 0
From: Tennessee
Default

Originally Posted by highwaypatrol
Assuming you find a hydraulic clutch lever for your bike, would't it require a different type of mechanism at the clutch end as the cable type normally pulls on the clutch lever whereas the hydraulic action would have to push against the lever? Maybe I'm not thinking straight?
Most hydraulic clutch levers I've seen have a master cylinder on the lever end and a slave cylinder at the other end. Pulling the lever in causes the slave cylinder at the other end of line to pull the clutch actuator arm (or whatever its called).
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
subyman1440
CBR 600F2
8
Dec 24, 2012 06:51 AM
Edward Tristram
600 Modifications
5
Jun 21, 2012 06:33 PM
revilingfool
General Tech
1
Mar 19, 2011 01:59 PM
fbpsb82
General Tech
6
Jan 30, 2010 02:23 PM
malbojah
CBR 600F4
0
Nov 8, 2006 03:55 PM




All times are GMT -5. The time now is 03:16 PM.