General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

CBR 600 F3 Quad project.

Thread Tools
 
Search this Thread
 
  #41  
Old 03-13-2012, 05:48 PM
Dirtrider009's Avatar
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Elmer NJ
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

VIDEO0073 - YouTube

Video of the bike starting up and a rev or two.

And a quick little view of the bike and my mess of tubes and carbs.

VIDEO0072 - YouTube
 
  #42  
Old 03-13-2012, 11:01 PM
crlydave's Avatar
Junior Member
Join Date: Dec 2011
Location: arizona
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default hoses

2 water lines go to carbs,with 1 hose connecting them at the carbs(on the inside of the outer carbs)
 
  #43  
Old 03-13-2012, 11:05 PM
crlydave's Avatar
Junior Member
Join Date: Dec 2011
Location: arizona
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

they are the lower set of small hoses on the carbs,pper set go to air valve solenoid
 
  #44  
Old 03-17-2012, 07:48 PM
Dirtrider009's Avatar
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Elmer NJ
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

Well shes up and running, took here for a joy ride last night and around a bit today. only probelm i have now is my clutch slipping, first is fine al the way through and itll slip in second if i hammer on it. I have to ease it into third otherwise it just revs. and i havnt tried 4th.

Just a simple adjustment, or do i need a new clutch?
 
  #45  
Old 03-18-2012, 06:10 AM
MadHattr059's Avatar
Retired Super Moderator - At large E=MC2
Join Date: Feb 2011
Location: Tulsa,OK
Posts: 2,299
Likes: 0
Received 4 Likes on 4 Posts
Default

If yo've got the 1/4" to 3/8" play in the cable at the bar lever, then you're probably
looking at new plates.

I'd check free-play first, just to be sure. Other than that, there really isn't any adjustment,
that I'm aware of.

Ern
 
  #46  
Old 03-18-2012, 10:27 AM
bomber315's Avatar
Junior Member
Join Date: Feb 2012
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

well even if it was adjustable, chances are the slipping you did on the test ride probably smoked it.... been there done that... "eh the clutch is just slipping a little bit, i just wanna ride it a little bit more. then ill adjust it" poof! fried clutch
 
  #47  
Old 03-18-2012, 09:25 PM
Dirtrider009's Avatar
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Elmer NJ
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah, i assumed id new need plates anyway, but my levers a bit tight ill loosen it a bit tom. and she what she does.

Thanks.
 
  #48  
Old 04-06-2012, 06:58 PM
exodus191's Avatar
Member
Join Date: Jan 2010
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

Any updates? Pics?
 
  #49  
Old 04-07-2012, 12:24 AM
Dirtrider009's Avatar
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Elmer NJ
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

Oh yes, sorry. Ill get some photos of her tom.

It runs great, fixed my clutch issue, just needed some adjusting. Ill take a video of it too.

I just got my overflow tank for the radiator yesterday, that was the last part i was waiting on before it was 100% mechanically/complete.

Now im working on a set of nerf bars for it, and i have to figure out a different sprocket for it as i destroyed the quad sprocket using the bike chain XD Wooppppssss Wasnt thinking about that lol.

Also trying to cut and fit the quad plastics nicely to fit around the front and use the quad healight. Trying to find a cheap pair of fairings for the rear to make it look sleak and sexy.
 
  #50  
Old 04-09-2012, 12:28 PM
Dirtrider009's Avatar
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Elmer NJ
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

Here are a few Pictures of it now, soon itll have Nerf bars, and Hopefully a new chain, and sprocket. Ill get a video here sometime, probably once i get a new sprocket so i can actually get it to haul some ***.


Name:  IMAG0514.jpg
Views: 465
Size:  58.5 KB

Name:  IMAG0513.jpg
Views: 462
Size:  129.7 KB

Name:  IMAG0512.jpg
Views: 832
Size:  108.3 KB
 


Quick Reply: CBR 600 F3 Quad project.



All times are GMT -5. The time now is 08:04 PM.