I removed both fairings, center fairing, unmounted raditor, moved it little away to create some space! still the freakin spark plugs r so deep... when i take my spark plug too out, I dont see anything, its just not cming out!

Also I can not use a long extension but using two small extensions are there is just not enough space.
How can I get those sparks plugs out? any suggestions??
Any other removal to be done?

 

You don't have the right tools. Its really not a difficult thing to do when you have the right ones. I used a standerd spark plug socket and about a 6" extension or so.

 

There is a spark plug tool in your tool bag that fits perfect,unless you don't have it then play around with different extensions to where it just clears the valve cover.

 

if your spark plug socket is crap then it wont hold the plug in there, stick a magnet in there a good strong one and pull the plug out.

 

use 2x 6 inch ext. and universal joint

 

I foun it easier to prop the tank up outta the way, remove the air box and go in through the top. use a 3in ext. and a swivel. get a piece of rubber hose about six inches long to get 'em out and to help install new ones. keeps 'em from cross threading.

 

I went from the top and even though I could see what I was doing it was still a PITA. I think I used two extensions, an universal joint, and a lot of swearing.

 

everybody is right, using that special tool from the factory works perfect, i was able to take mine out removing the radiator, but I can imagine how difficult it must be without it...