I'm finnaly rolling around to buying a new chain & sprokets. I also need the rivet tool correct? Is there anything else I should buy as a bundle to save on the shipping?
http://www.sprocketcenter.com/p/3717...f4i-01-06.html

 

FYI I just used a Motion Pro chain tool kit. It worked very well for me. Just an FYI.

 

chain, riveter/press and chain link is all you need..as long as you have something to cut the chain with...dremel is perfect!

 

Yeah man, dremel ftw! lol

And I too had the MotionPro kit, worked awesomely greatttt!

 

Lol, i dont have anything to cut the chain with, only a hacksaw, that could be ages. How much is a decent dremmel?

 

dremel or anything really to grind the head off one side of the pins and drive it out. I use a 4" angle grinder or an air powered cut off tool.

 

you can get an imitation dremel from home depot...for about 30 bucks or so. you don't need the baller $70 set, just one that can grind off the head as ghost said. then drive the **** out with the press tool...

i use my kung fu to drive it out.