Ok, Ive been to the Yoshimura site after hearing Matt_m427's yoshi soundclip. Never realized the Yoshi's had such a high pitch "scream" at full throttle. I'm looking at the RS-3's in carbon. The photo on their website is taken at an angle and makes the can look almost like a shorty. I'm curious if this can is a "shorty" length???? Do any of you guys know what the length on it is? If' it's as short as the photo makes it appear this would definitely be the exhaust for me. Here's the pic I'm looking at:

 

no theyre not short theyre the same length as most exhausts,not shorty at all

 

Yep. Regular length. But if you want it shorty its REAL easy to do.

 

How easy is it to do?????? Is there a write up somewhere??

If you shorten it does it affect function/back pressure/etc?????

 

No not at all. ALL i did was remove the bottom sections rivets, then cut how much I wanted removed with a table saw and reinstall the rivets and brackets that connects the can to the mid pipe. I did this while making my high mount. Only difference is it sounds a little louder and beefier. No change to backpreasure or performance.

 

I haven't gotten a chance to get a vid of my bootleg shorty (between rain and work and baby it just hasn't worked out yet...), but here are the vids i made of my Yosh TRS. Thought you might like a listen to compare it with.

Fly by
http://www.youtube.com/watch?v=rB1MBcLFi3A


Drive by
http://www.youtube.com/watch?v=wb2VoSi0jzc

 

Sounds real good...very much like my scorpion after I cut it 4inchs