Changing front springs without rear?
#1
Changing front springs without rear?
So I am 6'5" 212lbs, 232lbs with gear with a slightly heavier Corbin seat... call it 8-10 lbs more.
Race-tech recommends a 1.01kg spring for my weight up front, and a 15.3 rear. (stock being 14.2)
They don't sell my rear or close to it so I was going to go penske after this summer. But I want to try to do the front end right away. Is that ok?
Will doing this spring, with rebound on front, be a bad thing to do before the stock rear is replaced?
Will the ride and feel be too far unbalanced? Or is it just a bit rougher but balanced enough on full preload in the rear.
Race-tech recommends a 1.01kg spring for my weight up front, and a 15.3 rear. (stock being 14.2)
They don't sell my rear or close to it so I was going to go penske after this summer. But I want to try to do the front end right away. Is that ok?
Will doing this spring, with rebound on front, be a bad thing to do before the stock rear is replaced?
Will the ride and feel be too far unbalanced? Or is it just a bit rougher but balanced enough on full preload in the rear.
#2
Thread
Thread Starter
Forum
Replies
Last Post