954 Fender Removal / Modification
Joined: May 2006
Posts: 80
Likes: 0
From:
RE: 954 Fender Removal / Modification
I'm looking for the fender, if someone wants to sell theirs.
e-mail me at proframe59@aol.com
e-mail me at proframe59@aol.com
Joined: Jun 2006
Posts: 13
Likes: 0
From: Brisbane, Australia
RE: 954 Fender Removal / Modification
That is spot on mate. You dont have to cut anything on the 954. I wouldnt want to cut anything. I found
this item on ebay in Great Britain. I took all the measurements off the bike and made it myself. They wanted $150 for it. It even
uses the stock licence plate light. You can use the stock indicators or aftermarket ones. Id give ya the measurements but i lost them, sorry. Anyway i hope this hels ya out!!
[IMG]local://upfiles/8115/A3C7DCCE0BDB4C9AA88A05B96DAFC8CC.jpg[/IMG]
[IMG]local://upfiles/8115/2428D2DC0389439480415212E3CABAE9.jpg[/IMG]
this item on ebay in Great Britain. I took all the measurements off the bike and made it myself. They wanted $150 for it. It even
uses the stock licence plate light. You can use the stock indicators or aftermarket ones. Id give ya the measurements but i lost them, sorry. Anyway i hope this hels ya out!!
[IMG]local://upfiles/8115/A3C7DCCE0BDB4C9AA88A05B96DAFC8CC.jpg[/IMG]
[IMG]local://upfiles/8115/2428D2DC0389439480415212E3CABAE9.jpg[/IMG]
Member
Joined: Feb 2006
Posts: 87
Likes: 0
From:
RE: 954 Fender Removal / Modification
i dont have any pics but i got mines off pretty easy . there is a bolt sitting under the latchof the rear seat if i remember there is also so other nuts to be removed to get to it but that bolt sits behind the reflector so you have to remove it from the inside of the rear seat
Thread
Thread Starter
Forum
Replies
Last Post
