Turns over doesn't start after carb clean
#1
Turns over doesn't start after carb clean
Ok I've removed my carbs tons of times I even installed my jet kit. This time figured while had carbs and everything off would flush coolant and change oil. Did all that cleaned carbs reassembled everykthing perfectly. But when I went to start my bike it just kept turning over would never ignite.. So I'm guessing maybe I fouled the plugs. Only thing I can think of I'm about to change them just wanted your guys opinion. All it does is turn over.
Ps really dumb question lol but when I reassembled my throttle cables to carbs and checked to see if they were where I wanted them I gave the throttle alittle tug and it didn't move. Somehow I reversed something instead of pulling the throttle towards me to accelerate now I have to turn it up towards the rear brake and. Don't want to pull carbs off again to get easy access at the throttle mechanism to see what I did wrong so if anyone has any clues lol about any of this it would be greatly appreciated
Ps really dumb question lol but when I reassembled my throttle cables to carbs and checked to see if they were where I wanted them I gave the throttle alittle tug and it didn't move. Somehow I reversed something instead of pulling the throttle towards me to accelerate now I have to turn it up towards the rear brake and. Don't want to pull carbs off again to get easy access at the throttle mechanism to see what I did wrong so if anyone has any clues lol about any of this it would be greatly appreciated
#2
Ok update changed the plugs and realized it should still try and start with fouled plugs so yeah. Needed changing anyways. However it still just turns over doesn't even sound like she's trying to start. I went back checked to make sure all hoses were reconnected and in correct order and they were. Could have something to do with fuel pump but I didn't even touch that and it worked perfectly fine yesterday everything did in fact I just decided to do a routine tune up which I have done a thousand times and now I'm stumped.
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post