(Painting) Wish me luck
. Already had a 4.6 gallon 2 hp compressor I got for $99 back when I bought the bike. 1.4mm Kawasaki HVLP detail spray gun $36 (I also have a 1.7mm HVLP gun for primer but don't recommend it with a compressor that small).Dunno about 1 handed push ups but I can definitely block hella better than Daniel-San

PS
Got about another $20 to spend I think. I need to buy some masking frisket and a rattlecan of paint to try a stencil painted design of a dragon down the lowers.
Last edited by Kuroshio; Nov 1, 2009 at 04:14 PM.
Well here's the end results from the first try. Also pics of the damage from the spill







Tank needs to be redone but I knew that soon as it started drying. Just gonna patch the right upper while I shop for a new one. The decals I got off ebay and will get another set soon. And TROPhouse was completely correct. The duplicolor clear coat is extremely weak. Guy asked me when i planned to clear it







Tank needs to be redone but I knew that soon as it started drying. Just gonna patch the right upper while I shop for a new one. The decals I got off ebay and will get another set soon. And TROPhouse was completely correct. The duplicolor clear coat is extremely weak. Guy asked me when i planned to clear it
Hey I am doing the same thing and having the same problems. I thought the panels were smooth but the primer brings all the mistakes out!! I keep priming and fixing.
I have paint on a couple of pieces but not close to being finished. I ordered all my stickers yesterday!! I cant wait to get it done and see how it looks. I am painting it a metallic color called Carbon Black.
I will post some pictures tomorrow.
I have paint on a couple of pieces but not close to being finished. I ordered all my stickers yesterday!! I cant wait to get it done and see how it looks. I am painting it a metallic color called Carbon Black.
I will post some pictures tomorrow.
That's very LOLZY. I'm not making fun of you at all either. I dropped my bike within a week of putting it back together too. I'm still prepping the plastics, making sure I do everything right this time.
Where'd you get those logos by the way?
Where'd you get those logos by the way?
BCB: I'm thinking that what happened to me was the paint lifting because of different types. The paint I used was lacquer based and if it lays on an enamel, it'll lift. Just means I have to invest more in sandpaper and take er all the way down next time
TROPhouse: Got them from ebay a long time back. can't find the seller atm but will check my PP account to find him. They were actually pretty good and easy to apply
TROPhouse: Got them from ebay a long time back. can't find the seller atm but will check my PP account to find him. They were actually pretty good and easy to apply
Thread
Thread Starter
Forum
Replies
Last Post




