i have a 95 cbr.600. i just got this bike about 2 months ago in oder to start the bike we pulled it with a truck and it's starts but im trying to figure out this wiring problem. now what do i need to look for , cause it does not crank what so ever when i push the start buttom so please give me some detail.

 

Start with the easy things. Check your fuses. Then check the battery. Use a multimeter. Should be around 12.4 volts sitting and about 14 at 4-5k rpms. Let us know after you do that

 

fues good battery good bike will not start as of now cause i dont feel like pulling it with a truck so anything

 

ok done that and nothing still

 

you can bump start it. you dont need a truck. push it fast in 2nd gear with the clutch pulled then jump on and let go of the clutch. so what is the battery at when you rev to 4-5k rpm?

 

well i have to have a truck to get it going fast enough and to do it many time to get it to warm up the but im just trying to figure how to figure out wats going on with the starter buttom or is it the wiring it self

 

Use a test light or a voltmeter to trace the power path from the battery to the starter. It will go through the start switch, kill switch, kickstand switch, and a relay. Get a diagram and figure out what is what.

 

got cha thanks then if im good though all there then what and what kinda of voltage or ohms am i looking for