Its easy to get at and top up, but where is the cap/plug that drains it? Spent 20m looking for it on the radiator. (without stripping all the fairing off)

 

Removing the side panels only take a fewminutes so you willget access to thelarge water hose. This is better than flushing through a small drain plug (if there is such). Perhaps the temp sensor at the bottom of the radiator can be removed, but this is not recommended since it will put a lot of stress on the radiator.

 

Bottom bolt of the water pump on the left side of the bike is the drain for the whole cooling system

 

As mentioned above and also below the tank to refill the system. Hope these help

[IMG]local://upfiles/10939/B87442DEF65C4E1CABD7F67C9A92B613.jpg[/IMG]

[IMG]local://upfiles/10939/B97E303E72CE4E03B894F5D0FC3F570C.jpg[/IMG]

 

Ah great thanks, also what is it s capacity? The owners manual is a bit vague..

 

edit: Still cannot find the cap... 99' model...help.

 

well you got the answer from three of the top five for knowledge in this section

 

The cap or the drain plug?

The filler cap on 93- is located under the small fairing on the right side under the throttle tube.

The drain bolt is here:

[IMG]local://upfiles/5414/5BA51141118D4D03A9394F5104AF3A09.jpg[/IMG]