Bike is struggling to start...
#11
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: TimBucTwo
I would not rule out the R/R....
I would not rule out the R/R....
As an aside, I cleaned out the carbs yesterday, it fired up ok. I kicked it over this morning and it fired up pretty quickly. I stopped at the servo for gas on the way to the orifice, and it took ages tostart again...
#12
![Default](/forum/images/icons/icon1.gif)
![EEK!](https://cbrforum.com/forum/images/smilies/eek.gif)
https://cbrforum.com/m_382825/tm.htm
Still, I'll exhaust all other avenues first before trying this scenario...
#13
![Default](/forum/images/icons/icon1.gif)
Well, the brand newYuasa went in,but the starting problems still exist. So now I've got a strong indication of what the problem is, thats my nextSaturday sorted. I'm going to swap the plates around first up, andif still no joy, I'll be buying a newdamperset for christmas...
I'll update this thread when its all done.
Thanks for all your feedback, tips and ideas.
Hat tip to you all.
[sm=bling.gif]
![Frown](https://cbrforum.com/forum/images/smilies/frown.gif)
Thanks for all your feedback, tips and ideas.
Hat tip to you all.
[sm=bling.gif]
#14
![Default](/forum/images/icons/icon1.gif)
There was a complete starter clutch on e-Bay a week ago - I'll see if I can find it.......![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
Here you go 3 days left, 40 pounds asked, no bids yet, brand new.....
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=280286459526
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
Here you go 3 days left, 40 pounds asked, no bids yet, brand new.....
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=280286459526
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
#15
![Default](/forum/images/icons/icon1.gif)
Hey Shadow.
It'll be the Alt damper (which gets confused with the sterter clutch)that causing the grief, as wasmy baby's prob.
Haven't seen one of those in your travels have you???![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
None avail in NZ
and the one I picked up was a back ordered one that the couldn't return..
It'll be the Alt damper (which gets confused with the sterter clutch)that causing the grief, as wasmy baby's prob.
Haven't seen one of those in your travels have you???
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
None avail in NZ
![Frown](https://cbrforum.com/forum/images/smilies/frown.gif)
#16
#17
![Default](/forum/images/icons/icon1.gif)
Here're all the parts that fit on the stator shaft, with a pic attached :
QUANTITY REF# PART #REQ YOUR PRICE
01 BASE, ALTERNATOR
11102-MS2-610 001 $57.44
[hr] >
02 GEAR (46T)
28110-MM5-010 001 $85.74
[hr] >
03 COLLAR
28115-MM5-020 001 $14.00
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 (replaces28120-MS2-611) 001 $129.53
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 (replaces28125-MS2-612) 001 $129.53
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 001 $129.53
[hr] >
05 DAMPER, ALTERNATOR
28130-MS2-610 001 $99.95
[hr] >
06 DISK, SPRING
28151-MM0-003 002 $7.12
[hr] >
07 CHAIN (70L)
28161-MM5-013 001 $71.54
[hr] >
08 TENSIONER, ALTNTR
28170-MM5-640 001 $85.95
[hr] >
09 GUIDE
28191-MM5-000 001 $29.31
[hr] >
10 ROTOR
30291-MS2-610 001 $10.45
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 (replaces30300-MS2-600) 001 $41.48
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 (replaces30300-MW7-000) 001 $41.48
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 001 $41.48
[hr] >
12 NUT, FLANGE (12MM)
90234-MM4-000 001 $3.82
[hr] >
13 WASHER (20X37X2)
90404-KK0-000 001 $3.29
[hr] >
14 BEARING (17X40X12-U)
91006-HA2-008 (replaces91005-MM4-003) 001 $16.34
[hr] >
14 BEARING (17X40X12-U)
91006-HA2-008 001 $16.34
[hr] >
15 BEARING (25X30X20)
91106-ME5-008 001 $15.34
[hr] >
15 BEARING (25X30X20)
91108-634-961 001 $15.34
[hr] >
16 O-RING (100X2.2)
91303-PA9-004 (replaces91303-PA9-003) 001 $6.19
[hr] >
16 O-RING (100X2.2)
91303-PA9-004 001 $6.19
[hr] >
17 CIRCLIP (42MM)
94520-42000 001 $1.43
[hr] >
18 BOLT, FLANGE (6X14)
95701-06014-08 005 $0.82
[hr] >
19 *95701-06016-08
95701-06016-00 002 $0.82
[hr] >
20 BOLT, FLANGE (10X20)
95701-10020-08 Tell me what you need - www.Mrcycles.com has all the bits.![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
QUANTITY REF# PART #REQ YOUR PRICE
01 BASE, ALTERNATOR
11102-MS2-610 001 $57.44
[hr] >
02 GEAR (46T)
28110-MM5-010 001 $85.74
[hr] >
03 COLLAR
28115-MM5-020 001 $14.00
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 (replaces28120-MS2-611) 001 $129.53
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 (replaces28125-MS2-612) 001 $129.53
[hr] >
04 CLUTCH, STARTER
28125-MS2-613 001 $129.53
[hr] >
05 DAMPER, ALTERNATOR
28130-MS2-610 001 $99.95
[hr] >
06 DISK, SPRING
28151-MM0-003 002 $7.12
[hr] >
07 CHAIN (70L)
28161-MM5-013 001 $71.54
[hr] >
08 TENSIONER, ALTNTR
28170-MM5-640 001 $85.95
[hr] >
09 GUIDE
28191-MM5-000 001 $29.31
[hr] >
10 ROTOR
30291-MS2-610 001 $10.45
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 (replaces30300-MS2-600) 001 $41.48
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 (replaces30300-MW7-000) 001 $41.48
[hr] >
11 GENERATOR, PULSE
30300-MW7-003 001 $41.48
[hr] >
12 NUT, FLANGE (12MM)
90234-MM4-000 001 $3.82
[hr] >
13 WASHER (20X37X2)
90404-KK0-000 001 $3.29
[hr] >
14 BEARING (17X40X12-U)
91006-HA2-008 (replaces91005-MM4-003) 001 $16.34
[hr] >
14 BEARING (17X40X12-U)
91006-HA2-008 001 $16.34
[hr] >
15 BEARING (25X30X20)
91106-ME5-008 001 $15.34
[hr] >
15 BEARING (25X30X20)
91108-634-961 001 $15.34
[hr] >
16 O-RING (100X2.2)
91303-PA9-004 (replaces91303-PA9-003) 001 $6.19
[hr] >
16 O-RING (100X2.2)
91303-PA9-004 001 $6.19
[hr] >
17 CIRCLIP (42MM)
94520-42000 001 $1.43
[hr] >
18 BOLT, FLANGE (6X14)
95701-06014-08 005 $0.82
[hr] >
19 *95701-06016-08
95701-06016-00 002 $0.82
[hr] >
20 BOLT, FLANGE (10X20)
95701-10020-08 Tell me what you need - www.Mrcycles.com has all the bits.
![Big Grin](https://cbrforum.com/forum/images/smilies/biggrin.gif)
#18
#20