General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

Tearing out the carbs

Thread Tools
 
Search this Thread
 
  #1  
Old 01-08-2007, 11:54 PM
ThisisMickey's Avatar
Thread Starter
Join Date: Jul 2006
Location:
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
Default Tearing out the carbs

So I have a 94 F2 and I am really tierd of the way my engine sounds. It always seems to be making a ticking noise at low RPM's and especially when it is cold in the morning, it sounds like i can hear the piston going up and down, but i havnt had it die on me or anything. So I plan to take apart, my carbs, and clean them and i really think i need to get to the jets and clean those out because when i had it synced it just came unsynched again. Any advice on where i could find a service manual or any advice on how i could go about taking off the carbs... and or cleaning them. Also I think I need to adjust the timing, and i want to try to do it myself because it takes over a month for the shop near me to get to my bike. So if anyone has any suggested protucts they know of i could buy to help me with this i would greatly appreciate it.
 
  #2  
Old 01-10-2007, 07:39 PM
rrasco's Avatar
Senior Member
Join Date: Mar 2006
Location: South Texas
Posts: 5,844
Likes: 0
Received 1 Like on 1 Post
Default RE: Tearing out the carbs

it may also be a cam chain tensioner that needs to be replaced. apparantly its notorious for going out on CBRs or Hondas.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dpasch
CBR 1000F "Hurricane"
0
02-23-2010 06:30 PM
kmanracing24
CBR 600F3
14
07-22-2009 06:36 PM
ClutchBurningRacing
CBR 1100XX "Super Blackbird"
7
09-11-2006 06:39 PM
SVTFire
General Tech
6
08-24-2006 07:28 PM



Quick Reply: Tearing out the carbs



All times are GMT -5. The time now is 03:21 AM.