lowering 2002 f4i in the rear
Thread Starter
|
Junior Member
Joined: Jul 2010
Posts: 22
Likes: 0
From: Dallas
yes she can reach da controls jus fine....her bike is the 02 f4i and she dont got the banana seat. well her bike is at the shop so i guess we can go over there and see how she would fit if the seat was completely off the bike...
jusasquid......what website are u talkin bout that u read about shavin parts and things?
jusasquid......what website are u talkin bout that u read about shavin parts and things?
Thread Starter
|
Junior Member
Joined: Jul 2010
Posts: 22
Likes: 0
From: Dallas
i agree once she gets comfy she wont need to stand flat footed, but its the seat time first before she can get out and ride it. so she gona be practicing in the apartments and the cul de sac by my apts...
Senior Member
Joined: Apr 2008
Posts: 2,492
Likes: 0
From: Northern Michigan
jusasquid......what website are u talkin bout that u read about shavin parts and things
http://www.soupysperformance.com/ins...tructions.html
half way down the page, it reads this:
5. When adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance.
Thread Starter
|
Junior Member
Joined: Jul 2010
Posts: 22
Likes: 0
From: Dallas
yea i read that on the site. i emailed them and sent them a pic to see what they sugguest. as far as a 250 she dont want that or even a 500. at one point i was tryin get her to get the sv650 but she dont like that style. she had sat on a newer cbr awhile back and the guy was not much taller than her. she sat on it good. dont remember the year tho, cus i wasnt there at the time.
Senior Member
Joined: Aug 2009
Posts: 378
Likes: 2
From: UK
This is what the link looks like. If you have a chance, you can go to the website where it tells you about more about the link. It says that it will fit the f4i. soupysperformance.com
When I went back to the shop to sit on it and see how much further I had to go, the guy said that the wishbone was the problem that wouldn't allow it to go any lower.
I have attached the actual picture of the part on the bike along with a few others. hopefully it will help with what I am talking about.
We already had the kickstand shortened which you can see in the pic too.
When I went back to the shop to sit on it and see how much further I had to go, the guy said that the wishbone was the problem that wouldn't allow it to go any lower.
I have attached the actual picture of the part on the bike along with a few others. hopefully it will help with what I am talking about.
We already had the kickstand shortened which you can see in the pic too.
Your chicken strips are shameful.
Thread Starter
|
Junior Member
Joined: Jul 2010
Posts: 22
Likes: 0
From: Dallas
donnybrago...first of all playboy we bought the bike jus like that. hasnt be ridden but once or twice....second u aint got nothin helpful to contribute to this thread and my sis move yo *** around homie....
