Engine Rattle
#11
RE: Engine Rattle
do some searches...you can mod the OEM so it doen't get all loose and make noise.
one thing you can do is flare or change the pin located at the tip of the cctl. this will get rid of noise from the rattling. second, you can would the spring inside the cctl once or twice to give it some more tension.
also, the OEM cctl actually does have a manual function...if you take off the bolt at the rear of it and then stick a small flathead driver in there and turn counter clockwise, it actually extends the tip of the cctl!
note, the cctl is designed not to back out...so it can only go forward...
one thing you can do is flare or change the pin located at the tip of the cctl. this will get rid of noise from the rattling. second, you can would the spring inside the cctl once or twice to give it some more tension.
also, the OEM cctl actually does have a manual function...if you take off the bolt at the rear of it and then stick a small flathead driver in there and turn counter clockwise, it actually extends the tip of the cctl!
note, the cctl is designed not to back out...so it can only go forward...
#16
#17
#20