Okey dokey, do that, think the thing at present is to get the bike running, can always change anything once your at that stage

 

it was running when I first got it as the person who owned it used to race it not sure on what type of racing,ive also realised it hasn't got throttle position sensors could some of the things missing be because the engine has been raced up as I was told it had a race engine,iam very close to getting it done its driving me crazy and aim also trying to paint it, going with baby blue with a white stripe

 

Have you got a pic of where the TPS is missing from,as the TPS wires look like their all there

 

I haven't a clue as to where it would should be when I was going through the wiring I found the wires but didn't no where they went

 

Should be on the left side of the carbs looks like this

 

nothing like tht on the cards at all

 

do I need it as he used to ride the bike

 

should be sat in this position

 

It could be you have the 1996-97 engine , that didnt have a TPS, but only had a 9 wire ECU, but as you said it was running, it could have been running without the TPS in a limp home mode if the engine was a 1998-99 and the TPS faulty/missing, have you got the engine number

 

This one looks like a lighting switch connector, but as you see the blue/white wire is wrong