89 hurc 600 no start
#1
89 hurc 600 no start
Hey guys...I posted the other week about fautly solenoid...well I replaced that and got the starter to turn over from the ignition, but now I have no spark. I put a multi tester to the connecter at the CDI/spark unit and Im not getting any power to any of the wires. Im also not getting any power to the fuel pump. All my fuses are fine, and there are no visible open circuts in the harness. Power to the headlamp, signals, and starter but nothing to the cdi...any ideas?
#3
Post in the CBR600F section for a better response. There are lots of things to check. Do either of you have a multimeter? Check the engine kill switch, side stand switch. Need more info. Also , like I first wrote, post in the CBR 600F section if you have an 87-90 CBR 600F.
Last edited by Billistic; 04-20-2009 at 01:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
JayBoCC2
F4i - Main Forum
4
06-23-2009 10:23 PM