CBR Forum - Enthusiast forums for Honda CBR Owners

General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

06 cbr600 f4i fuel pump not priming

Thread Tools
 
Search this Thread
 
  #1  
Old 03-21-2019, 03:40 PM
06cbr600f4i's Avatar
Member
Thread Starter
Join Date: Mar 2019
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default 06 cbr600 f4i fuel pump not priming


I changed my blinkers to flush mounts and ever since, my fuel pump wont prime and my bike will turn over and over and over. I have a empty connector and wondering if that’s the issue. Cant see anywhere that plug would go? Bike turned over just fine before all of this. And yes my headlights work
 
Reply Like
  #2  
Old 03-21-2019, 03:50 PM
CaBaRet's Avatar
Super Moderator
Join Date: Oct 2016
Location: Lancs ,UK
Posts: 2,519
Likes: 0
Received 5 Likes on 5 Posts
Default
Hi the only 3 pin plug I know at the front end belongs to the BAS, if thats disconnected your bike wont start
 
Reply Like
  #3  
Old 03-21-2019, 04:23 PM
06cbr600f4i's Avatar
Member
Thread Starter
Join Date: Mar 2019
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by CaBaRet
Hi the only 3 pin plug I know at the front end belongs to the BAS, if thats disconnected your bike wont start
it does have the two little relays on the front that bolt to the back of the headlight housing, and one of them has that same exact connection. But I don’t know where it would go I don’t see any female connectors.
 
Reply Like
  #4  
Old 03-21-2019, 04:39 PM
CaBaRet's Avatar
Super Moderator
Join Date: Oct 2016
Location: Lancs ,UK
Posts: 2,519
Likes: 0
Received 5 Likes on 5 Posts
Default
 
Reply Like
  #5  
Old 03-21-2019, 04:45 PM
06cbr600f4i's Avatar
Member
Thread Starter
Join Date: Mar 2019
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default I c
Originally Posted by CaBaRet
my bike doesnt even have a BAS on it :/, it was probably bypassed by the last owner
 
Reply Like
  #6  
Old 03-21-2019, 06:44 PM
74demon's Avatar
Administrator and MVN, March 2012/Oct 2013 ROTM
Join Date: Sep 2011
Location: socal 949/951
Posts: 12,193
Received 117 Likes on 107 Posts
Default
Originally Posted by 06cbr600f4i

my bike doesnt even have a BAS on it :/, it was probably bypassed by the last owner
Then you need to make sure it's still bypassed.
 
Reply Like
  #7  
Old 03-22-2019, 02:43 AM
CaBaRet's Avatar
Super Moderator
Join Date: Oct 2016
Location: Lancs ,UK
Posts: 2,519
Likes: 0
Received 5 Likes on 5 Posts
Default
As Demon say's bypass the switch, there are 3 wires , Green , White and Red/White, connect the Green and the Red/White with a piece of jumper wire , on the harness side and your bypassed
 
Reply Like
  #8  
Old 03-23-2019, 01:12 PM
06cbr600f4i's Avatar
Member
Thread Starter
Join Date: Mar 2019
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by CaBaRet
As Demon say's bypass the switch, there are 3 wires , Green , White and Red/White, connect the Green and the Red/White with a piece of jumper wire , on the harness side and your bypassed
so I connect the two outside wires on the 3 pin plug together?
 
Reply Like
  #9  
Old 03-23-2019, 01:15 PM
CaBaRet's Avatar
Super Moderator
Join Date: Oct 2016
Location: Lancs ,UK
Posts: 2,519
Likes: 0
Received 5 Likes on 5 Posts
Default
Thats right, 2 outside wires
 
Reply Like
  #10  
Old 03-23-2019, 01:36 PM
06cbr600f4i's Avatar
Member
Thread Starter
Join Date: Mar 2019
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by CaBaRet
Thats right, 2 outside wires
so just to be clear, all i’m doing is splicing those two wires together
 
Reply Like



Advanced Search
Quick Reply: 06 cbr600 f4i fuel pump not priming


Reply Closed Thread Share

All times are GMT -5. The time now is 12:32 AM.