ok,

finally got a couple of decent pix. MC is off an 03 GSXR 750 and is a direct bolt on. i have aftermarket clip ons in the pix but i also had the MC with stock clip ons and it cleared the fairing stay, etc.

[IMG]local://upfiles/2436/10335861201740FBBACBB61C895B1BCF.jpg[/IMG]

 

close up...


[IMG]local://upfiles/2436/DA1ECB03B9904E51A2A8F96C81CA3A88.jpg[/IMG]

 

Good stuff tahoe

For anyone doing this, keep in mind the 06/07 GSX-Rs have terrible M/Cs that fade pretty bad and have to be rebuilt a lot

 

Maybe this is a dumb question but why do people put those bands around the brake fluid reservoirs? I've always wondered...

 

there are many reasons...pressure, leaks, UV, etc.
but mine isn't just a band...mine is specifically designed for tennis...not motorcycles (which cost 6x more).
i put mines on there for style points though.

looks > functionality

 

What made you go with an 03 gsxr750 one?

 

it's just what was available on ebay at the time and i knew would fit with minimal to no modifications at all.

it ended up fitting great. just had to find a way to mount the remote resevoir.

if you have the bling, hit up brembo!

 

any master will work as long as the bore isn't to small for two calipers.or vise versa
06-07 gsxr master work great.i've run them for my handbrake
and recently swap my 954 for the radial.if you use rbf600 fluid/stainless lines and BLEED properly, the brake will be dead nuts......i roll 600ft stoppies with that master

 

I dont understand? why did you do that?

 

cause stock F4i resevoir kept stripping to hell and i wanted to see if there was any improvement with radial type.

'feel' is improved, not sure about stoppage.