I am having trouble getting my new Motrax LED's to work correctly. I followed the how to but they just don't work correctly. The Motrax have black and yellow wires I assumed the yellow was the same as the hot bodies red wire and did everything the same. They are very dim and when they blink the other side blinks too although not very noticably. I used the 1N4001 diodes from Radio Shack and I also got a Motrax Flash it that is suposed to replace the stock relay to slow the speed of the blinker and it didn't work. When I installed the Flash it the binkers wouldn't blink at all. Any ideas?

Curt

 

I'd remove the diodes & figure out which wire is which (positive/negative) on the turn signals.