Hi everyone.
my 2006 f4i runs great and everything on the bike works perfect. except the FI light that no matter what I have tried to do is still there, "solid on", all time. ☹️
I already tried to read the codes but there are no codes. tried to do the reset, still the light is on. I also intentionally disconnected one of the sensor that belongs to the fi light to see if it’s blinking and it did. (off course i connected that sensor back after that).

I already searched in this forum and also on google but through all the posts that i saw and tried to do what people suggest the fi light is still on..

I know what the service manual says about "stay lit". But still trying my luck before throwing out a few hundred bucks for new ecm..

hope someone can help🙏🏻🙏🏻
Ori.

 

Sorry Ori, not sure what else to suggest on top of all the things that you have already tried except Ignore it!
If the bike is running properly and will 'blink' if their is a problem I would not be forking out for a new ecm.
Just my

 

F new buy a used ecm for way less. Best bet is find a buddy with same bike and borrow theirs to see if it works