F4i - Main Forum Main F4i discussion board

bike running poor! no go after revved up and clutch poped

Thread Tools
 
Search this Thread
 
  #1  
Old 06-24-2009, 01:57 PM
ridinsolowx15's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default bike running poor! no go after revved up and clutch poped

so i've been noticing lately i can't pull the bike up in second gear anymore. before no problem. so this is the problem ridin in 2nd gear i rev it up nice and pop the clutch for a clutch wheelie but when i pop the clutch it revvs up a little as the clutch is slipping and then just kinda looses power or doesn't have the power it used to. so this is what i've checked. The clutch plate and disc look brand new, and replaced map sensor. doesn't appear to be any kinks or problems with cluthc cable or any of the clutch for that matter. kinda wierd problem? I also inspected the throttle bodies and intake valves(visually seeing no problems) Any help would be nice! thnaks
 
  #2  
Old 06-24-2009, 08:50 PM
bwayers's Avatar
Senior Member
Join Date: Nov 2007
Location: Lexington, NC
Posts: 601
Likes: 0
Received 0 Likes on 0 Posts
Default

did you just look at the clutch plates or did you measure them against their service limit?
 
  #3  
Old 06-25-2009, 12:24 PM
ridinsolowx15's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

i checked them against a new oem plates at the honda store and they were won a little but def had to look to see it
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastspares
CBR 600F3
3
03-02-2010 08:21 PM
derekdaniel08
CBR 600F3
0
07-25-2008 10:34 PM
topi
CBR 1000F "Hurricane"
4
05-04-2008 03:49 AM
scoosh
New Member Area
0
04-14-2008 03:12 PM
bryanut
General Tech
0
05-24-2007 06:30 PM



Quick Reply: bike running poor! no go after revved up and clutch poped



All times are GMT -5. The time now is 03:22 AM.