Originally Posted by RMH3

heres my baby w/ the cowl on. got it on last night at like 1 am after literally working 17hrs....I have no patience =D







I installed in literally 20 mins in mid of night... super easy

Originally Posted by gotcbr

Nice post knonfs.

The Targa, once fitted/adjusted, is secure on the bike...no rattling whatsoever...rock solid.

It comes w/ its own hardware that allows the rear to snap into the seat lock like your orig seat. You'll use your key to unlock the Targa to remove just like you would your seat.

The front mounts are nothing like your orig seat. As Indiana mentioned, the Targa hardware has rubber grommets mounted in metal brackets, which mount to your subframe seat bar. The cowl itself has metal spikes that mount/insert into those grommets/brackets on the subframe. You insert these first, then snap the rear down to secure on the lock.

I leave the subframe mounted brackets on my bike & rotate them down so that I can switch off from cowl to regular seat. When I want to use the cowl, I just rotate the brackets back up (tighten of course) & secure the cowl. No problem.

Here's pics of the Targa cowl as it came. It's the unpainted option.
You can see the hardware on the underside. You'll see in my pic of the bike how the Targa mounting brackets are sercured. The way they are in the pic, they are rotated down so I can use my regular seat. To use the cowl, I just rotate them up, secure, & the cowl justs pops on.







Definitely quality stuff.

Originally Posted by revels

where can I find the seat cowl for the split seat? does it use the same as the RR? I cant find one, the only ones I can find are Euro style for the banana seat f4i