F2 Tech Tech Subsection (for any mechanical, repair, and DIY threads)

Seafoam?

Old Oct 29, 2012 | 10:44 PM
  #1  
jbalber's Avatar
Thread Starter
|
Member
Joined: Sep 2012
Posts: 53
Likes: 0
Post Seafoam?

Sea foam.... Is it really good for your engine. I am aware that you can run it through both your fuel and oil system, but does it really help? Will it do more harm than good?
 
Reply
Old Oct 30, 2012 | 09:51 AM
  #2  
adrenalnjunky's Avatar
Senior Member
Joined: May 2010
Posts: 1,753
Likes: 3
From: West Monroe,Louisiana
Default

It's pretty well-regarded stuff.

I run a half-can through my fuel about twice a year in all of my vehicles. I wouldn't add it to the oil on a motorcycle - I'm not sure how it would agree with your clutch.

I do add it to the oil in my cars about every 4th oil change.

I also add it to my chili recipe for a little added kick......wait, sorry that's beer. Everything else is right though.
 
Reply
Old Oct 30, 2012 | 10:43 AM
  #3  
underground-mpyre's Avatar
Senior Member
Joined: Feb 2009
Posts: 602
Likes: 3
From: Indy, Broad Ripple Area
Default

Love the stuff! I use it about 4 times a year for the abuse I give my bike daily. Helps get the crap out of fuel lines and Carbs/motor. I don't under estimate the cleaning power of it. Seems to wake the bike a little more. My opinion.
 
Reply
Old Oct 30, 2012 | 12:40 PM
  #4  
vegas_rebel's Avatar
Senior Member
Joined: Sep 2010
Posts: 436
Likes: 1
From: Las Vegas, NV
Default

I love it too; bought a big gallon size and I run it through every few tanks. I've used it to revive a Harley that was so bogged from sitting that it blew fireballs from the exhaust for most of a tank.

I've run it through the oil and my oil wasn't black. I suppose that's a good thing, but I can't speak to its effectiveness. It didn't effect the shifting or anything though.

I did run it through the carbs directly and got the expected smoke billow.

Anecdotally, Sea Foam seems to give even a well-running bike a bit more power, but it's not going to turn it into a liter bike or anything.
 
Reply
Old Nov 1, 2012 | 11:44 AM
  #5  
jbalber's Avatar
Thread Starter
|
Member
Joined: Sep 2012
Posts: 53
Likes: 0
Default

Thanks for the replies everyone, I was skeptical at first because there are many products that claim that they clean but really end up making things worse. I have also heard that running either isopropyl alcohol or was it ethyl alcohol through the gas tank can help, but im pretty sure it would leave a residue, because not every component of the alcohol would burn all the way.....any thoughts?
 
Reply
Old Nov 1, 2012 | 11:45 AM
  #6  
jbalber's Avatar
Thread Starter
|
Member
Joined: Sep 2012
Posts: 53
Likes: 0
Default

I'm craving chili now.......haha
 
Reply
Old Nov 2, 2012 | 03:47 PM
  #7  
underground-mpyre's Avatar
Senior Member
Joined: Feb 2009
Posts: 602
Likes: 3
From: Indy, Broad Ripple Area
Default

Isopropyl alcohol will definately eat the $h!t out of your seals. A associate(dumb@s$) I know thought he would run a half gallon through his Kawa 636 tank saying he would get more Hp he read on the internet. Well, severe loss of power and hard time with reaching higher gears until he mixed more & more fuel in. A week later, dumping a quart of oil in the engine every 2 weeks with a constant black smoke. The alcohol we established has a lower flashpoint mixed with 93 octane and 11.5:1 compression was prematurely burning before full engine stroke, so the severe loss of power was the result. The alcohol and fuel with cylinder grime must've made some sort of acidic concoction to eat the valve seals and carb seals.
PLEASE DO NOT TRY TO PROVE ME WRONG, THIS WILL DESTROY YOUR MOTOR!!!!
 
Reply
Old Nov 20, 2012 | 10:58 PM
  #8  
thealphalum's Avatar
Registered Users
Joined: Sep 2012
Posts: 4
Likes: 0
Default

I know you can get the spray seafoam and spray it directly into the throttle body on fuel injected cars to help with cleaning valves and intake. i am thinking about removing my air filter and spraying it through there. Good idea or bad? Does anyone have a better idea?

Its an 05 600rr by the way.
 

Last edited by 74demon; Nov 20, 2012 at 11:26 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dad0507
CBR 600F3
9
Sep 3, 2014 06:59 AM
hikeetech
CBR 600F4
15
Sep 28, 2012 04:32 PM
RudyGT
F4i - Main Forum
12
Aug 31, 2012 08:57 PM
ZBike
General Tech
8
Apr 7, 2012 11:51 AM
TimBucTwo
CBR 1000F "Hurricane"
2
Mar 15, 2012 11:59 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:03 AM.