1st start up and im a little worried
#11
I did pull one of my plugs the other day because I decided to replace them. I am not great at reading them so ill check some post out and see what I can come up with. I think your right because it was dark. Is the only way to change that to dig into the carb? Sorry so many "dumb" questions still getting used to doing this
If for some reason you feel its out of your league feel free to ship them to me, or even take a ride over. I live in pittsburgh so I am not too far from you.
#12
#13
K, send me a pm if you decide you want to head out this way. If your plugs are dark then they are probably fouled or close to it so you will need a new set of those. Just don't foul new ones all over again. Make sure you fix the reason why they foul.
#15
#18
looked at your carb clean and tune dissevered and think im gonaa give it a go my only question is that if im running rich, from the pics of the plugs i think i am, which way do i turn the pilot screw to lean it out. P.S didnt go all the way through it as i didnt have time so if you answered that in their sorry
#20
looked at your carb clean and tune dissevered and think im gonaa give it a go my only question is that if im running rich, from the pics of the plugs i think i am, which way do i turn the pilot screw to lean it out. P.S didnt go all the way through it as i didnt have time so if you answered that in their sorry
also, while you are in there, check the jet needles to see if you have a jet kit. Those are adjustable as well.