127.8 HP on a very humid day last thursday

The guys said it wasn't the best day to run do to the humidity. I have a two bros m-2 bolt on, a/f's were around 13.5 except I had a rich hiccup from 45-60 mph at 11.8. I ran the bike as soon as I pulled into the lot so it was a little hot.

Does this number sound a bit right considering the weather conditions or am I suffering from a lack of power?

 

I have never been dynoed, but compared to some of the numbers i have seen posted on here, it seems a lil low. Lowest is usually around the mid 130s. Maybe the humidity did play a factor.

 

149.7 to the tire, -took alot of work

 

Hmm, that doesn't seem right. 127HP? Here's my dyno numbers. I don't have a scanner so bare with me.

I got more than that and my bike was off the chart lean when the initial run was done. I have a K&N filter, Two Bros slip-on, and a PCIII.

http://i307.photobucket.com/albums/n...ynoresults.jpg

Initial run yielded 138.6HP and 70.99lbft. of torque

After custom map, results yielded 144.38HP and 74.21 lbft. of torque

 

I'm going to try and dyno it elsewhere with decent weather to see if I get any different results. Its starting to seem really low now....it only has 9300 miles on it, I replaced the air filter yesterday but the old one wasn't even that dirty.

Even the most modified 1000rr there only put down 141. The rest were around 135-138.

600rr's were putting down 103-104

 

120-130 SOME HORSIES SOUNDS DISAPPOINTING. MAYBE I NEED A SUZUKI AFTER ALL........... HAHAHA YEA RITE I LOVE MY HONDER 954.

 

Yea those numbers seem about 10-20 hp off to me.

 

It could be the dyno... That sems kinda low to me

 

Motorcyclist has them at 131 HP brand new and stock. They key here is that they only weigh 370 lb's drynot many bikes that can touch that power to weight ratio.

 

What do they weigh wet? I have done every weight reduction measure known to man and with my tank full my bike weighs 379