hi all , can sum 1 plz help me , i've tried to put pic's on here of my blade but keep gettin error messages , i've tried so many times i've given up , i past my mod 1 last wk so yeh ya guessed the blade is my 1st bike & i've noticed there's no fuel gauge on it , is it poss to fit one , if so how much & where preferbly close to derbyshre

 

Not sure what error message youre getting. Are your pics too large? a Photobucket link is the best way to get pics on here.

As far as the fuel guage, the 929 has a low fuel light. As long as it is working, you shouldnt need a guage. Using yhe odometer, light, and a little math you will know hoe much gas you have in the tank.

 

thanks for your reply , i've tried photo bucket & still can't get em on , i know nothing about the blade cos it's my 1st bike so yeh thanks again for ya help , the message i get wen i try to upload my pics is , upload file failed ???

 

1. Load the pictures you want to post on CBRF to Photobucket.

2. From Photobucket, copy IMG. Code Picture file of the picture you want to share on CBR.

3. Then paste direct onto thread & post.

I know there are many ways to upload photo but this seems to be the easiest way.

For multiple pictures, just copy all of the IMG. Code and paste all onto your Note Pad first, then from your note, copy all and paste direct onto thread.

 

As for the gas gauge, I've been riding w/o gauge for long time.

1. Just make sure your petcock is north. So when you are out of gas, reserve (south) is there for back up.

2. When on the road, shake the bike R/L...you should be able to hear if there is gas?

3. Worst case, pull over, open gas cap, visually view if there is gas.

Don't bother installing a gauge for gas level? It's just not the way these bike are built...you have to grow a relationship/trust with the bike....

+1 Like demon said...

 

don't look too hard for a petcock, you wont find one.