Can any one tell me whats the stock carb setup on a F3?
Jets sizes air correction setting etc…

 

AS NEAR AS I COULD FIGURE FROM OUR FICHEFINDER THE 95 TAKES THE SAME MAIN JETS IN ALL 4 CARBS, #135. THE PILOTS ARE #38. MY 98 HAD BIGGER MAINS IN THE TWO MIDDLE CARBS. I DON'T THINK THEY STARTED DOING THIS UNTIL 97. MY AIR/FUEL SCREW FROM FACTORY WAS 1/2 TURN FROM BOTTOM. YOURS WILL PROBABLY BE DIFFERENT. HOPE THIS HELPS.

 

Thanks for your reply.
My air/fuel screw is 2.5 turns. I think this is standard for most bikes cause my old GS500 Suzuki use to have the same settings but if this setting is wrong. Please!!! anybody correct me