How to- front fender removal?
Hello all,
Started to remove my front fender (has a crack) and after I removed the front two allen wrench bolts I noticed it was being held on in the back of the fender too. Anyone have a link or vid or anything on how to remove the fender properly? It "looked" like the fender is somehow attached near or with the breaks but again I'm not sure. Just don't want to start unscrewing something and then realize it's way more complicated then it looks.
I found a vid only about putting a new one on but it totally skipped from sliding it in between the forks to drilling the holes for the same two spots I already see how to work with. Said nothing about how it's held on in the back.
I realize its a silly question for those that work on bikes all the time but having owned 3 sport bikes over the years and having had my M licensence for 20 yrs I never once had to do any work at all on any of my bikes so I just plum don't know how to do it and I ain't gonna sugar coat it and pretend I do. Lol.
Thanks in advance.
Started to remove my front fender (has a crack) and after I removed the front two allen wrench bolts I noticed it was being held on in the back of the fender too. Anyone have a link or vid or anything on how to remove the fender properly? It "looked" like the fender is somehow attached near or with the breaks but again I'm not sure. Just don't want to start unscrewing something and then realize it's way more complicated then it looks.
I found a vid only about putting a new one on but it totally skipped from sliding it in between the forks to drilling the holes for the same two spots I already see how to work with. Said nothing about how it's held on in the back.
I realize its a silly question for those that work on bikes all the time but having owned 3 sport bikes over the years and having had my M licensence for 20 yrs I never once had to do any work at all on any of my bikes so I just plum don't know how to do it and I ain't gonna sugar coat it and pretend I do. Lol.
Thanks in advance.
Last edited by ThatsMydawg; Oct 13, 2010 at 09:53 PM. Reason: Typo
The fender is held in back by 2 bolts, you can just unscrew those, it doesn't hold the brakes, it holds the cables in closer together and I believe has reflectors...
once you remove the 2 bolts, just move the fender up.
once you remove the 2 bolts, just move the fender up.
iv just stripped my cbr 600 f3 down to frame and engine
and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can
.
and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can
.
iv just stripped my cbr 600 f3 down to frame and engine
and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can
.
and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can
.**Sorry for the thread-jack**
Thanks to everyone! I'm replying to this via my iphone so I'll just thank all of you at once. I'll take the fender off this weekend and if possible post some pics to help someone else in the future. Thanks again from your CBR brother from another mother. Lol
Good luck, let us know if you have trouble.
Thread
Thread Starter
Forum
Replies
Last Post




