A little change..
#1
A little change..
If any of you remember my old thread of my bodywork fab, I changed the F2 from this:
To this:
Painted and fabbed myself, this winter I decided to hold off any major projects with the supra and change up the bike a bit more. My current plans are to swap the 900RR motor in, a 954RR front end (forks, wheel, brakes, and controls), and maybe the VFR SSSA if time and money allows.
This previous Friday I made a drive to pick up a 900 motor, should only have 1,600 miles on it since the rebuild. Currently has an aftermarket clutch, polished covers, and a few other goodies.
Now all cleaned up:
To this:
Painted and fabbed myself, this winter I decided to hold off any major projects with the supra and change up the bike a bit more. My current plans are to swap the 900RR motor in, a 954RR front end (forks, wheel, brakes, and controls), and maybe the VFR SSSA if time and money allows.
This previous Friday I made a drive to pick up a 900 motor, should only have 1,600 miles on it since the rebuild. Currently has an aftermarket clutch, polished covers, and a few other goodies.
Now all cleaned up:
#2
#4
Sorry got rid of those last year.
#6
How the heck is the F2 harness going to work with a 900 ecu? I dont know. Do the ecu's have the same plugs where they plug in to the wire harness. Maybe the ecu have the same part number. On a side note I have a stock 09 R1 complete exhaust that might work. Its titanium. If every thing works out maybe I'll put a 900 engine in my F2. Which would actually be kind of stupid since I have a 08 cbr 1000 anyway. But it would still be cool as hell.
#8
Ill be using the f2 ecu also, I talked to a guy running the 900 in his f3 and used his f3 harness and ecu with no issues
.
Thanks baron! As far as the speedo goes im currently running the f4i cluster so my speedo is driven off the front sprocket with a 900rr sensor and a speedo healer. My temp gauge is a sensor from a 929 that ill also be transfering to the 900 motor
.
Thanks baron! As far as the speedo goes im currently running the f4i cluster so my speedo is driven off the front sprocket with a 900rr sensor and a speedo healer. My temp gauge is a sensor from a 929 that ill also be transfering to the 900 motor
Last edited by YourEnemy; 10-06-2011 at 11:59 AM.