I've been looking for a replacement main stand for my 93 F2 PC25 so have been trawling through eBay listings coming across a few from various models and some that look to me to be the same throughout certain years of different models. Earlier today I found two that look identical, so after examining both very carefully made the decision to buy one. This being my first ever CBR at the moment I'm not sure of what is the same, what is interchangeable throughout differing models and years but sometimes if it looks right and the money is right you just gotta jump on it when you find it, so I have.

My question to those of you in the know is this, I found two stands that were identical, one was listed as being from a 600F 1991 / 1994 part number being A779 that was a penny under fifty bucks 'pounds here. The other was listed as being from a 600F 1997 / 1998 FV - FW part number being A775 for the grand sum of £35 it 'was £40 but I got him down.I did initially type in CBR600 F2 Main stands and these were listed so I'm kinda hoping I've bought the correct stand, please see included images and give me your thoughts.

CBR600F 1991 / 1994 A779

CBR600F 1997 / 1998 A775

 

Huh, certainly looks similar. 2nd one has extra stuff at pivot axle that you can easily chop off.

 

Visually they are both "right", the one from the F3 looks identical to mine on the F2 but obviously, without detailed measurement, it's going to be suck it and see.

The pivot pin has the correct fittings, the spring link is correct - a good clean and paint then the job's a good'un :-)

 

Yup that's just about what I thought Ed, thanks for verifying buddy appreciate it

 

Hi danno, I think you are looking at it wrong I studied both of these very carefully and they are identical, it's only for one of them having the fixing pin in place that it looks different, have another close look you'll see what I mean.

 

Sorry, didn’t realise 2nd one had extra hardware installed.