CBR600 F1 startup/crank troubleshooting
#14
its either that or I cant find neutral.. but the display says im in neutral and i can roll it when im in neutral. but when i put it into gear and couldnt even roll the baack wheel when i dropped the clutch. Im pretty sure the starter motor clutch is stuck. could be faulty. but either way cant turn the engine. Let me know what you guys think.
#15
#16
#17
already have a copy of the manual. Im pretty sure its reading neutral correctly. Because the bike will roll when the indicator is green.. then when i pput it into gearit wont roll. its just stuck. It has some play in it but the second I drop the clutch bam it wont roll back or foward. In one gear I actually could hear the starter turning when i pushed foward (not sure on the gear) like the starter clutch was still engaged. Im pretty sure the timing is correct on the cam because I started the bike up just the other day and it ran great. Im pretty sure this starter clutch has failed or is stuck engaged. any pointers on an easy fix? probably shouldnt have cranked it for that long without a break.. does anybody know of any other possible problems? or a way I can fix it without taking it apart?
#18
already have a copy of the manual. Im pretty sure its reading neutral correctly. Because the bike will roll when the indicator is green.. then when i pput it into gearit wont roll. its just stuck. It has some play in it but the second I drop the clutch bam it wont roll back or foward. In one gear I actually could hear the starter turning when i pushed foward (not sure on the gear)
The other part isn't but are you sure it's not just the sound of your chain??
#19
im pretty sure it was the starter. I hope i didnt grind a gear down.. Im just going to open up that starter cover and figure out the clutch issue. I tested everything with a multimeter and was picking up around 18v through the solenoid when i pushed the start button. ordered a new solenoid for the heck of it. Do you guys think this could be a valve timing issue?
#20