As the title says i need help removing the rotor. I took the cover off and the bolt that looks like it is holding the rotor on but this thing will not come off! almost seems like you need a special tool? any advice is greatly appreciated!

 

Its a press fit so you will need to use a puller to get it off. The bolt presses the rotor on, so once you remove the bolt, the rotor is still pressed onto the tapered crankshaft.

 

is there a special puller to use or just any puller? also, would you put the handles of the puller on the holes in the rotor or around the whole rotor itself?

 

search for helms, it should be in there with step by step instructions