Possible MK1 cbr Project
#1
Possible MK1 cbr Project
I've been looking for a suitable Mk1 CBR thou for some time to replace my CBR 750. I've seen several over the last year or so, which were either to messed up, stupid price or done a zillion miles. I came across this the other day and contemplating it. The start price is more than alittle steep and need negotiating down to be realistic. Apart from the front end 'aerodynamic' alterations the bike 'looks' to be tidy from the below average pic's. The low milage is a real bonus.
I can get a front end at a reasonable cost and a I have a complete front top end fairing set up hanging around complete with mounts, light, indicators etc.
Have a look and see what ya think. Any pointers would be good. Cheers, Andy
Honda CBR1000F 1988 | Trade Me
I can get a front end at a reasonable cost and a I have a complete front top end fairing set up hanging around complete with mounts, light, indicators etc.
Have a look and see what ya think. Any pointers would be good. Cheers, Andy
Honda CBR1000F 1988 | Trade Me
#2
Andy you may need a new pair of front forks (which as it happens I have in my shed)
Cost ? Just the postage. (which may be a bit steep, given the weight)
There's that full set of fairings on e-bay.UK that's going for 199 pounds + postage.
It's hard to tell if you need an upper fairing frame, or it's repairable. Headlamp is a def replacement.
If any of the gauges don't work I have some that do.........again, postage only, ditto a set of carbs that I bought on e-Bay ages ago and have never used.
Possible damage to the neck and upper frame - can't see. Cracking/twisting is a possibility.
Best option is to have a good look at it up close before you decide, which is obvious I guess. Take pics yourself - it's not going to go too far very quickly.
Some good close up shots would make it easier to give you ideas and advice.
Good luck with it.
Cost ? Just the postage. (which may be a bit steep, given the weight)
There's that full set of fairings on e-bay.UK that's going for 199 pounds + postage.
It's hard to tell if you need an upper fairing frame, or it's repairable. Headlamp is a def replacement.
If any of the gauges don't work I have some that do.........again, postage only, ditto a set of carbs that I bought on e-Bay ages ago and have never used.
Possible damage to the neck and upper frame - can't see. Cracking/twisting is a possibility.
Best option is to have a good look at it up close before you decide, which is obvious I guess. Take pics yourself - it's not going to go too far very quickly.
Some good close up shots would make it easier to give you ideas and advice.
Good luck with it.
#4
See you have most of the spares covered.
I have a front axle too, found yesterday.
His asking opening price is really steep, given the damage..............
Maybe around $700 ?
Hard to tell local prices from here but an unrideable bike loses a load of value.
All the bits I have are from a Mk1 which a friend owned and he left with me when he sold it.
Let me know if you need any of it Andy.
I have a front axle too, found yesterday.
His asking opening price is really steep, given the damage..............
Maybe around $700 ?
Hard to tell local prices from here but an unrideable bike loses a load of value.
All the bits I have are from a Mk1 which a friend owned and he left with me when he sold it.
Let me know if you need any of it Andy.
#5
Cheers Chaps, I've started with a few intro questions about the bike via the auction. I will be in touch with the owner over the weekend to get more details and hopefully some pics directly to me for assessment. I'll let ya know how I get on.
I've been checking up with wreckers to see what is avail parts wise, to which most are but prices are alittle scary to say the least. I've also forwarded a copy of pics and info to various biker mates for their view regarding pricing. They all agree the price is too steep and should realistically be at most $700 taking into account the cost of parts etc
Shadow, your offer of parts is most gracious, if all goes well I might need to PM ya. An awesome offer and many thanks for the offer.
Sprock, thanks for the ROTM nom, be good to see an ole 750 gear grinder on the top for once. Bike is in bits at the mo doing the valve clearances. Looks like I may have to change out a worn lifter arm.
Cheers Andy
I've been checking up with wreckers to see what is avail parts wise, to which most are but prices are alittle scary to say the least. I've also forwarded a copy of pics and info to various biker mates for their view regarding pricing. They all agree the price is too steep and should realistically be at most $700 taking into account the cost of parts etc
Shadow, your offer of parts is most gracious, if all goes well I might need to PM ya. An awesome offer and many thanks for the offer.
Sprock, thanks for the ROTM nom, be good to see an ole 750 gear grinder on the top for once. Bike is in bits at the mo doing the valve clearances. Looks like I may have to change out a worn lifter arm.
Cheers Andy
#6
You may have tried Darryl at
* Honda Motorcycle Parts & Honda Motorbike Spares From Japanese Motorcycle Dismantler. HONDA Motorbike Salvage. We Recycle Motocross, Scooters, Offroad, Commuter & Farm bikes. New Motorcycles Being Wrecked Daily.* Honda motorcycle parts & honda moto
but if not it may be worth giving him a call. I had good service from them.
Always a pleasure to help, Andy.
* Honda Motorcycle Parts & Honda Motorbike Spares From Japanese Motorcycle Dismantler. HONDA Motorbike Salvage. We Recycle Motocross, Scooters, Offroad, Commuter & Farm bikes. New Motorcycles Being Wrecked Daily.* Honda motorcycle parts & honda moto
but if not it may be worth giving him a call. I had good service from them.
Always a pleasure to help, Andy.
#7
#9
That TK, would be a great Idea, if you could, that would be awesome. My thinking is around $700 hundy
I rang the owner last night, sounds genuine enough, he's in the pickle somewhat, so needs the cash, good start. However he pulled the usual "I've got a bloke interested that's happy to pay the grand just for the motor" BS. I didn't blink, just reinforced the forks issue, sourcing the parts and the cost. He happily informed me there is a set locally for $450, so this only backed up my point further.
From what we disscused.
*He got the bike from another bloke who had it stashed under his house for a while.
* he confirmed Rego is definately on hold.
* Last owner still rode the bike with bent forks (Keen bugger eh) have been straightend, but knackered the chrome, chipped and bits flaking off where straightened. Clip on bars straight, not been dropped on.
*Bike ran sweet as a nut after a tank and carb flush, no rattles, smoke or odd noises. Starts easily. (battery knackerd)
* Everything functions as it should (minor point, tool kit missing, but bat cover and strap there) Switch gear has the typical honda uv damage going white. Missing bolts from fairings in tool atrea under seat
*Fairing. Head area knackered, but clocks and inner covers OK. Right side only has one chip at the front. Left side front/top portion has chunks out of it. (From the two sets I have stored, I think I could cut and weld a new section on being good ole ABS) Fairings pushed out of alignment due to head fairing.
*Confirmed frame has no signs of cracking or paint flake due to movement at head stock area. He has checked over the rest of frame and is sound.
*front rim & disks confirmed straight (tyre flat from sitting) no front gaurd (I have one in storage)
*Exhaust system no rust, straight, only slight degradation on mufflers from storage.
*last owner lost the front axle and spacers. (Axle I have but no spacers, don't know if this will be an issue or not)
Auction finishes on Monday 12th at 2000
re the price, I told him it was over the top. I ended the conversation saying I will only bid 'IF' I can find forks etc. I gave him my cell number, said If I don't bid and bike does not sell to Txt or call me. Cheers Andy
I rang the owner last night, sounds genuine enough, he's in the pickle somewhat, so needs the cash, good start. However he pulled the usual "I've got a bloke interested that's happy to pay the grand just for the motor" BS. I didn't blink, just reinforced the forks issue, sourcing the parts and the cost. He happily informed me there is a set locally for $450, so this only backed up my point further.
From what we disscused.
*He got the bike from another bloke who had it stashed under his house for a while.
* he confirmed Rego is definately on hold.
* Last owner still rode the bike with bent forks (Keen bugger eh) have been straightend, but knackered the chrome, chipped and bits flaking off where straightened. Clip on bars straight, not been dropped on.
*Bike ran sweet as a nut after a tank and carb flush, no rattles, smoke or odd noises. Starts easily. (battery knackerd)
* Everything functions as it should (minor point, tool kit missing, but bat cover and strap there) Switch gear has the typical honda uv damage going white. Missing bolts from fairings in tool atrea under seat
*Fairing. Head area knackered, but clocks and inner covers OK. Right side only has one chip at the front. Left side front/top portion has chunks out of it. (From the two sets I have stored, I think I could cut and weld a new section on being good ole ABS) Fairings pushed out of alignment due to head fairing.
*Confirmed frame has no signs of cracking or paint flake due to movement at head stock area. He has checked over the rest of frame and is sound.
*front rim & disks confirmed straight (tyre flat from sitting) no front gaurd (I have one in storage)
*Exhaust system no rust, straight, only slight degradation on mufflers from storage.
*last owner lost the front axle and spacers. (Axle I have but no spacers, don't know if this will be an issue or not)
Auction finishes on Monday 12th at 2000
re the price, I told him it was over the top. I ended the conversation saying I will only bid 'IF' I can find forks etc. I gave him my cell number, said If I don't bid and bike does not sell to Txt or call me. Cheers Andy
Last edited by Ruaphu; 12-09-2011 at 01:46 PM.
#10
It looks like I may be posting forks then Andy Definitely won't cost $450 for postage, and last I looked they are in good order.
On the front spacer issue - maybe Dragon knows the answer to that - send him a PM (he's prob seen the thread anyway)
If you buy the bike, I have a few other bike "internals" - my buddy had 3 engines and only rebuilt one, so some of the rest is still here.....
Oh and you can use dubbin/Renapur on the UV damaged plastics - works well.
On the front spacer issue - maybe Dragon knows the answer to that - send him a PM (he's prob seen the thread anyway)
If you buy the bike, I have a few other bike "internals" - my buddy had 3 engines and only rebuilt one, so some of the rest is still here.....
Oh and you can use dubbin/Renapur on the UV damaged plastics - works well.