Locating a part !
Good evening Gentlemen !
I need your help locatinga fairing part for my CBR1000f Hurricane 1988. If you can please let me know. It would immensely be appreciated, I have been looking for that part fpor the last 6 months. It the left inside upper fairing trim. Especially that a vintage show has invited me to display my motorcycle.
Thanks to all
[IMG]local://upfiles/21139/A17CB662A1AC4298978795DF1C372EFA.jpg[/IMG]
I need your help locatinga fairing part for my CBR1000f Hurricane 1988. If you can please let me know. It would immensely be appreciated, I have been looking for that part fpor the last 6 months. It the left inside upper fairing trim. Especially that a vintage show has invited me to display my motorcycle.
Thanks to all
[IMG]local://upfiles/21139/A17CB662A1AC4298978795DF1C372EFA.jpg[/IMG]
Hey Carl, Coopz posted up pics of a cheap bike in Oz, and there are always parts on e-Bay.UK for your model. I have things like starter motors, clocks, clutch actuators, forks and so on, the mechanical bits, but no body parts.
Hello,
was it thebad one in the picture. Have you tried to fix it by youself. Buy some classfiber and two component eboksy and fill the whole hole. Grindand paint the whole part. It takes about 2 hours.
about 2 months snow anymore [8D]
was it thebad one in the picture. Have you tried to fix it by youself. Buy some classfiber and two component eboksy and fill the whole hole. Grindand paint the whole part. It takes about 2 hours.
about 2 months snow anymore [8D]
Actually that is what i did...and eve tried plastiglass, utthe result is not to my liking.. that is why i em looking for one.. will try ebay uk but if you guys find one... I ll take it lol
thanks
thanks
Try e-Bay.Fr There was one advertised there they were parting out - may not be the right one, but my French is terrible.....Je suis desole'
Must have been my lucky Day ! i called a part recycle shop 10 minutes from my plave et they jsut received a bike for parting out, The on side of the fairingthat was still goodas the left one.. Yes.!!! I have found it.
thanks for your help all
thanks for your help all
Salut Dragon64 (AKA Carl), ou a tu trouver ta pieces, le seul vendeur de pieces usages que je connais est MotocamJ? Il nous annoncent encore un gros paquet de "merde blanche" pour la fin de semaine! Comme c'est parti, on va peut-etre etre capable de sortir nos moto pour la St-Jean-Baptiste!
Hi Audiodan
you can call moto recylage in MYL north, also i know a guy whom does plastic welding, he did an xcellent job on the my ower fairing tabs. As for the snow another 30cm will make me go crazy !
you can call moto recylage in MYL north, also i know a guy whom does plastic welding, he did an xcellent job on the my ower fairing tabs. As for the snow another 30cm will make me go crazy !
Thread
Thread Starter
Forum
Replies
Last Post




